CARTA Sport — How to Clean

Regular cleaning keeps your CARTA Sport performing at its best. Clean the glass top and atomizer after every few sessions, and do a full clean weekly if you're a regular user.

Cleaning the Glass Top

1. 1
   Remove the glass top

   Pull straight up and out of the CONNECT. Use upward pressure with a slight sideways motion if it feels snug.

2. 2
   Soak in isopropyl alcohol

   Submerge the glass top in isopropyl alcohol for a few minutes to loosen residue.

3. 3
   Rinse with water

   Rinse thoroughly with warm water.

4. 4
   Air dry

   Let the glass top air dry completely before reinstalling.

Cleaning the Atomizer

1. 1
   Remove the atomizer

   Turn counterclockwise to unscrew. If it's stuck, run a 15-second session at the lowest temp preset to loosen residue, then try again.

2. 2
   Soak in isopropyl alcohol

   Submerge the Intelli-Core atomizer in isopropyl alcohol for 10 minutes.

3. 3
   Do not rinse with water

   Skip the water rinse — water can damage the atomizer. Isopropyl alcohol only.

4. 4
   Air dry

   Allow the atomizer to air dry for 1–2 hours before reinstalling.

Cleaning the CONNECT

1. 1
   Remove the CONNECT

   Pull the front edge up, then lift from the center to remove. (See the CONNECT installation guide for details.)

2. 2
   Wipe with an isopropyl alcohol cloth

   Wipe all surfaces of the CONNECT with an iso-dampened cloth.

3. 3
   Swab the reclaim channels

   Use a cotton swab dipped in isopropyl alcohol to clean the reclaim channels and airpath interior.

4. 4
   Air dry before reinstalling

   Let the CONNECT air dry completely before snapping it back into the device.

Reassembly

1. 1
   Reinstall the CONNECT

   Align the airpath, snap the back end in first, then press the front edge down.

2. 2
   Reinstall the atomizer

   Thread clockwise until snug. Do not overtighten.

3. 3
   Reinstall the glass top

   Set it into the CONNECT and press down until seated.