AERIS — How to Use

This guide covers every essential AERIS function — from powering on to customizing your session. Follow these steps for the best experience.

Session flow

1. 1
   Power on

   Click the V button 5 times rapidly. The device vibrates and LEDs illuminate to confirm it's on.

2. 2
   Select your temperature

   Press the V button once to cycle through the heat presets: Blue (425°F) → Yellow (450°F) → Green (475°F) → Purple (500°F) → Red (525°F). Stop pressing when your desired preset LED color is shown. For custom temperatures, connect via the V Browser app (www.focusv.app).

3. 3
   Start a session

   Double-press the V button. The device vibrates and begins heating. It vibrates again when the set temperature is reached.

4. 4
   Inhale

   Draw slowly and steadily through the mouthpiece. Slow draws produce the best vapor density and flavor.

5. 5
   Extend or end your session

   During a session: double-click V to add 10 more seconds, or press V once to end early. The session also ends automatically when the timer expires.

6. 6
   Power off

   Click the V button 5 times to power off. The device vibrates and LEDs cycle off.

Temperature settings

• Blue — 425°F (lowest, best for flavor-focused sessions)
• Yellow — 450°F
• Green — 475°F
• Purple — 500°F
• Red — 525°F (highest, densest vapor)
• Custom temperatures — set via V Browser app at www.focusv.app

LED preferences

Press the V button 3 times to enter LED mode. Press once more to cycle through the 5 color presets. The last option is ghost/stealth mode — all LEDs off for discreet use.

Battery level check

Press the V button 4 times to check battery: Green = ~75%+, Blue = ~50%, Yellow = ~25%, Red = ~10% (charge soon). Charge via USB-C at 5V 2A for up to 2 hours.

Related articles