INTELLI-CORE MAX — Using the AERIS Adapter

The AERIS Adapter is a magnetic ring that snaps onto the base of your AERIS. It creates the extra height the taller MAX atomizer needs so everything fits together properly — the silicone mouthpiece snaps on top with its magnet just as it normally would.

Setting up the AERIS Adapter

1. 1
   Power off your AERIS

   Make sure the device is off and cooled down before handling the atomizer.

2. 2
   Snap the adapter ring onto the AERIS base

   Align the magnetic ring adapter with the base of the AERIS and press until it clicks into place magnetically.

3. 3
   Attach the silicone bumper to the MAX atomizer

   Slide the silicone bumper over the top of the MAX atomizer. The bumper provides heat protection — it does not affect the seal between the atomizer and the base.

4. 4
   Thread the MAX atomizer into the AERIS base

   Screw the MAX atomizer (with bumper attached) into the AERIS base as you normally would.

5. 5
   Snap the silicone mouthpiece on top

   The silicone mouthpiece attaches magnetically to the top of the adapter — it should snap into place the same way it does without the adapter.