CARTA OG — Switching Atomizer Modes

The CARTA OG supports both concentrate and dry herb modes by swapping the atomizer. The device automatically detects which atomizer is attached and adjusts its behavior accordingly.

Concentrate mode (default)

The CARTA OG ships with the Everlast atomizer installed. Concentrate mode is active whenever the Everlast or Intelli-Core atomizer is attached. Note: The Everlast atomizer is discontinued but still fully supported.

Switch to dry herb mode

1. 1
   Power off the CARTA OG

   Press the power button 5 times to power off. Wait until the device is cool to the touch.

2. 2
   Remove the concentrate atomizer

   Twist the Everlast or Intelli-Core atomizer counterclockwise to remove. If stuck, heat on the lowest preset for 15 seconds to loosen residue, then power off and wait until cool before removing.

3. 3
   Install the Dry Herb Atomizer

   Thread the Dry Herb Atomizer clockwise into the base until snug. Do not overtighten.

4. 4
   Power on

   Press the power button 5 times. The CARTA OG will automatically detect the Dry Herb Atomizer and switch modes.

5. 5
   Set temperature for herb

   Recommended range for dry herb: 380–420°F (193–215°C). Use the V Browser app (www.focusv.app) to set custom temperatures below the built-in presets.

Switch back to concentrate mode

Repeat the steps above in reverse — remove the Dry Herb Atomizer, reinstall the Everlast or Intelli-Core, and power on. The device auto-detects the change.