SABER — How to Use

The SABER is a concentrate loading tool. Heat the tip to scoop wax or rosin and drop it cleanly into your atomizer or banger. Follow these steps to get started.

1. 1
   Charge before first use

   Plug in via USB-C and charge until the indicator light turns green. The SABER is ready to use once fully charged.

2. 2
   Select your heat setting

   Click the V button once to cycle heat levels: Blue (low) → Green (medium) → White (high). Softer waxes work well on Blue or Green; harder shatters on White.

3. 3
   Press and hold to heat the tip

   Press and hold the V button to heat the tip. The tip heats while held — release when ready. For solid or refrigerated concentrates, hold for approximately 3–5 seconds before scooping. For soft waxes at room temperature, you can use the tip cold.

4. 4
   Scoop your concentrate

   Insert the tip into your concentrate and scoop. Avoid forcing or prying — the tip is designed for smooth, clean collection.

5. 5
   Load into your atomizer or banger

   Transfer concentrate directly from the SABER tip into your CARTA, AERIS, or banger.

6. 6
   Toggle the LED spotlight (optional)

   Click the V button 3 times to turn the built-in LED on or off — useful in low-light settings.

7. 7
   Clean after each use

   Wipe the tip with a 50% isopropyl wipe while still warm (not hot). Never wipe a glowing-hot tip — wait 30 seconds first.

8. 8
   Replace the tip if needed

   If the tip breaks or heats inconsistently, tips are fully replaceable. Contact support@focusv.com or visit portal.focusv.com.